Searching For And Storing The Radio Stations; Selecting A Stored Station; Improving Radio Reception - Samsung MM-ZJ9DAB Instruction Manual

Searching for and Storing the Radio
Stations
You can store up to:
15 FM stations
15 AM stations
1
Switch the system on by pressing this (
2
Select the required frequency band by pressing the TUNER/BAND
button.
Result: The appropriate indication is displayed:
Frequency Modulation
FM
Medium Wave
MW
3
To search for a
station...
Manually
Automatically
PRESET function is explained in detail in the section

" Selecting a Stored Station " .

Select the station to be stored by:
4
Pressing the or
or buttons on the remote control to increase or
this
decrease the frequency respectively.
To scroll through the frequencies faster when
searching manually, hold down the
The automatic search procedure may stop on a
frequency that does not correspond to a radio station. If this
happens, use the manual search mode.
If you do not want to store the radio station found, revert to Step 4
5
and search for another station.
Otherwise:
a Press the PROGRAM/SET button.
Result: The PROG is displayed for a few seconds.
b Press the or buttons on the front panel or
or buttons on the remote control to assign a program
number .
c Press the PROGRAM/SET button to store the radio station.
Result: PROG is no longer displayed and the station is stored.
To store any other radio frequencies required, repeat Steps 3 to 5.
6
The PROGRAM function can be used to assign a new station
to an existing program number.
1
2
4
5
4 5
) button.
Press TUNING MODE
One or more times until MANUAL is
displayed.
One or more times until AUTO is
displayed.
buttons on the front panel or
or buttons.
5 4 5
3
2
3
4 5
Selecting a Stored Station
You can listen to a stored radio station as follows:
1
Switch the system on by pressing the (
2
Press the TUNER/BAND button to select the broadcasting type
you want.
3
Select the radio station as follows.
To listen to ... Press ...
Stored station 1. the TUNING MODE button until
2. the
1
2
3

Improving Radio Reception

You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
If reception from a specific FM radio station is poor, press the
MO/ST button. to switch from stereo mode to MONO. The quality of
the sound will be improved.
) button .
"PRESET" is displayed.
or button to select the
required program.
3 3
15
GB