Checking Or Changing Programmed Tracks; Searching For And Storing The Radio Stations - Samsung MAX-L42 Instruction Manual

Checking or Changing Programmed
Tracks
You can check or change your selection of tracks at any time.
1
Press once if you have started listening to the selection.
2
Press Program.
Result: The following indications appear:
(CH = Check, 01=Program No, DI = Disc No, – – = Track No on the disc)
If you have already programmed 24 tracks, CH is displayed
instead of PR when you press Program.
3
Press Program again.
Result: The first track selected is displayed, together with the letter
CH(Change).
4
Press Program one or more times until the track to be changed is
displayed.
5
If necessary, press the corresponding Disc (1, 2, 3) button to change
discs.
6
Press /
7
Press Program to confirm your change.
8
Press CD (
Result: The first track selected is played.
6
Downloaded From Disc-Player.com Samsung Manuals
or turn Multi Jog to select a different track.
) to start listening to the selection.
8
1
6
2,3,4,7
6
5
Program
EQ Disc Skip /Set AUX
Deck 1/2 2,3,4,7 AI Off Mono/ST. Tuner
Sleep Band
TAPE
8
1
CD
VOL.
6
6
Tuning
Mode
CD CD
CD CD
VOL.
Searching for and Storing the Radio
Stations
You can store up to:
15 FM stations
8 MW stations
7 LW stations
1
Switch the system on by pressing On/Standby.
2
Select the TUNER function by pressing TUNER .
3
Select the required frequency band by pressing TUNER (Band)
again on the front panel or TUNER (Band) on the remote control.
Result: The appropriate indication is displayed:
FM
AM(MW)
LW
4
To search for a Press Tuning Mode on the remote
station... control
Manually One or more times until MANUAL is displayed.
Preset One or more times until PRESET is displayed.
5
Select the station to be stored by:
Turning the Multi Jog knob to the right or to the left to increase or
decrease the frequency respectively
or
Pressing Tuning or on the remote control
To scroll through the frequencies faster when searching manu-
ally, hold down the Tuning Down or Up buttons.
The automatic search procedure may stop on a frequency that
does not correspond to a radio station. If this happens, use the
manual search mode.
6
Adjust the volume by:
Turning the Volume knob on the front panel
or
Pressing the VOL. + or – buttons on the remote control
7
Select the FM stereo or mono mode by pressing Mono/ST. on the
remote control.
2,3
5
1
Deck 1/2 AI Off
Sleep
TAPE
CD
VOL.
Tuning Tuning
Mode Mode
CD
CD
5
VOL.
Frequency Modulation
Medium Wave
Long Wave
6
5
5
Mono/ST. Tuner
Band
7
4
CD
CD
5
GB