Searching For And Storing The Radio Stations; Selecting A Stored Station; Improving Radio Reception - Samsung MM-ZB9 Instruction Manual

Searching for and Storing the Radio
Stations
You can store up to:
15 FM stations
8 MW stations
7 LW stations
1
Switch the system on by pressing On/Standy (
2
Select the required frequency band by pressing TUNER /Band
again on the front panel or Band on the remote control.
Result: The appropriate indication is displayed:
3
To search for a
station...
Manually
Automatically
4
Select the station to be stored by:
Turning the Multi Jog knob to the right or to the left to
increase or decrease the frequency respectively.
or
Pressing
To scroll through the frequencies faster when
searching manually, hold down the
The automatic search procedure
may stop on a
frequency that does not correspond to a radio station. If
this happens, use the manual search mode.
5
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press Program/Set.
Result: The PRGM is displayed for a few seconds.
b Press
number between 1 and 15.
c Press Program/Set to store the radio station.
Result: PRGM is no longer displayed and the station is stored.
6
To store any other radio frequencies required, repeat Steps 3 to 5.
The PROGRAM/SET function can be used to assign a new sta-
tion to an existing program number.
On/Standby
1
Phones
Downloaded From Disc-Player.com Samsung Manuals
FM
Frequency Modulation
AM(MW)
Medium Wave
LW
Long Wave
Press TUNE/CD Mode
One or more times until MANUAL
is displayed.
One or more times until AUTO is
displayed.
PRESET function is explained in detail in the section
"Listening to the Preset Stations" on.
or buttons.
or
/ or turn Multi Jog to assign a programme
Power Sound
TUNER
/Band
Demo REC/Pause Surround
2
C D
CD Synchro Sleep
TAPE
4 5
5
AUX 4
Open/Close
CD Repeat Mono/ST
Tuning Mode
3
+10
Repeat
5
2
Program/ VOL. Band
VOL.
3
Set
5
4
5
4
TUNE/CD TUNE/CD
Mode Mode
VOL.

Selecting a Stored Station

You can listen to a stored radio station as follows:
1
Switch the system on by pressing On/Standby (
2
Select the required frequency band by pressing TUNER/Band on the
front panel.
) .
3
Select the radio station as follows.
To listen to ...
Stored station
On/Standby
1
Phones
buttons.

Improving Radio Reception

You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
If reception from a specific FM radio station is poor, press Mono/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.
Mode
S.Bass
Level
Multi Jog
4 5
) .
Press ...
1. Press the Tuning Mode button until
"PRESET" is displayed.
2. / to select the required
programme.
TUNER
/Band
Demo
REC/Pause
2
C D
CD Synchro
TAPE
AUX
CD Repeat
Tuning Mode
3
Program/ Band
VOL.
Set
TUNE/CD
Mode
VOL.
Mono/ST Mute
GB
S
M
15