System Connections; Connecting To Power Supply; Connecting To External Av Signal Source - Daewoo DSL15M1TC Instruction Manual

System Connections

•
Open the back cover on the right side of the unit's rear panel.
•
Do not connect the power cord until all other connections have been made.
•
Ensure that you observe the colour code when connecting audio and video cables.

Connecting to Power Supply

Plug the power supply cord to the wall AC outlet.

Connecting to External AV Signal Source

Use the AV cables to connect the external AV signal source to the AV input jacks on the rear panel
of the unit.
Use a S-VIDEO cable (not supplied) to connect the external AV signal source to the S-VIDEO input
jack on the rear panel of the unit.
After connection, turn on the power of the unit and the external AV signal source and then press the
SOURCE button to select COMPOSITE or S-VIDEO mode.
Note: The L/R audio input jacks can be used in both COMPOSITE and S-VIDEO modes.
- 9 -