Impex MCB-5700 Owner's Manual page 8

STEP 3 (See Diagram 3)
A.) Attach the Backrest Incline Support (#10) in between the two side-holes on the
Backrest Supports (#12). Attach the Backrest Supports to the pivot on the Main Seat
Support (#3). Secure it with one M12 x 6 ¾" Hex Bolt (#40), two
and one M12 Aircraft Nut (#44).
B.) Place the other end of Backrest Supports rest against the Backrest Adjustment Bar.
C.) Place the Backrest Board (#17) onto the Backrest Supports (#12). Secure it with four
M8 x 1 5/8" Allen Bolts (#38) and Ø 5/8" Washers (#43).
D.) Place the Seat (#18) onto the Main Seat Support. Secure it with four M8 x 1 5/8" Allen
Bolts (#38) and 5/8" Washers (#43).
7
1" Washers (#41),
DIAGRAM 3