Connecting Your Monitor - Iiyama ProLite T2234MC User Manual

CONNECTING YOUR MONITOR

Ensure that both the computer and the monitor are switched off.
Connect the computer to the monitor with the signal cable.
Connect the computer to the monitor with the USB Cable.
Connect the monitor cable to the Remote Control OSD key (option), if necessary.
Connect the AC Adapter to the monitor and the Power Cable to the AC Adapter fi rst and then
connect to the power supply.
Turn on your monitor and computer.
 The signal cables used for connecting the computer and monitor may vary with the
NOTE
type of computer used. An incorrect connection may cause serious damage to both the
monitor and the computer. The cable supplied with the monitor is for a standard 15 pin
D-Sub connector. If a special cable is required please contact your local iiyama dealer
or regional iiyama offi ce.
 For connection to Macintosh computers, contact your local iiyama dealer or regional
iiyama offi ce for a suitable adaptor.
 Make sure you tighten the fi nger screws at each end of the Signal Cable.
[Example of Connection]
Remote Control
OSD Key
(option)
Power Cable
(Accessory)
<Back>
D-Sub Signal Cable (Accessory)
AC Adapter
(Accessory)
DVI-D Signal Cable (Accessory)
USB Cable (Accessory)
BEFORE YOU OPERATE THE MONITOR 7
Computer