Iiyama ProLite T2234MC User Manual page 12

[Fitting and Removal of Cable Cover]
Put a piece of soft cloth on the table beforehand
to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face
down.
< Removal >
Move the stand into position as shown in
Step1.
Remove the cable cover as shown in Step2.
< Fitting >
As shown in Step3, connect the cables and
put those through the cable holes.
As shown in Step4, place the cable cover
and fi x it fi rmly using a screw.
[Collect Cables]
Put the cables through the cable holes.
Collect cables at the back of the stand.
8 BEFORE YOU OPERATE THE MONITOR
Step1
Step 2
Cable Hole
Step3
Screw
Step2
Cable Cover
Step4
Step 2
Cable Hole