Basic Manual Recording; Picture Quality For Normal Recording - Mitsubishi Electric DX-NT400E Installation And Operation Manual

Basic manual recording

Normal recording using manual operation is described
below. Before you start recording, check the settings of
"HDD REPEAT REC MAIN" and "HDD REPEAT REC SUB"
in the <HDD SETTINGS> screen (
then set the recording settings.
Settings here are for normal recording only. For
timer recording, settings must be made on the
<TIMER PROGRAM SETTINGS> screen (
page 44).
Setting the recording interval and recording

picture quality for normal recording

To perform normal recording, "PPS" and "GRADE" must
be set for each camera.
Number of
operational
cameras
PPS
SHORT
Recording
interval
LONG
Setting of "PPS" (default: "3.125P")
"6.25P," "3.125P," "2.083P," "1.563P," "1.25P,"
"1.042P," "0.781P," "0.625P," "0.25P," "0.125P,"
"0.063P," "0.031P," "- - - - - -"
"- - - - - -": Recording is not performed with camera
set to this item.
Available recording intervals vary depending on
the number of cameras operating or ALARM RE-
CORDING settings (
above for the displaying interval.
Setting of "GRADE" (default: "STD")
"SUPER," "HIGH," "STD"(STANDARD), "BASIC,"
"LONG"
Example: Setting "PPS" of camera number "
and "GRADE" to "HIGH" for normal recording.
1. Press the SET UP button to display the <SETTINGS>
screen.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Basic Operations
see page 47), and
# 1 # 2 # 3
25P 12.5P 8.33P
12.5P 6.25P 4.165P
8.333P 4.167P 2.777P
6.25P 3.125P 2.083P
5P 2.5P 1.666P
4.167P 2.083P 1.388P
3.125P 1.563P 1.041P
2.5P 1.25P 0.833P
1P 0.5P 0.333P
0.5P 0.25P 0.167P
0.25P 0.125P 0.083P
0.125P 0.063P 0.042P
see page 41). See the chart
" to "1.25P"
1
2. Press the JOG
"RECORD SETTINGS" and then press the ENTER button.
• The <RECORD SETTINGS> screen appears.
<RECORD SETTINGS>
>>ALARM SETTING
RECORD SETTING
ALARM REC DURATION
3. Press the JOG
"RECORD SETTING" and then press the ENTER button.
see
• The <RECORD SETTING> screen appears.
<RECORD SETTING>
NO
>>
1
2
3
4
ALARM TYPE
PRE ALARM REC
# 4
6.25P <ESTD REC>
3.125P
CAUTION: For <ESTD REC>,
see "Continuous recording time table" on page 77.
2.083P
1.563P
About <ESTD REC>
1.25P
• The remaining recordable time is displayed as <ESTD REC>
1.042P
depending on the "PPS" and "GRADE" settings. (This time is
not change when changing the alarm recording settings.) For
0.781P
the details concerning the estimated recordable time,
0.625P
see page 77.
0.25P
4. Check that the cursor is positioned at "
0.125P
the ENTER button.
0.063P
• The setting item of "PPS" is highlighted.
0.031P
<RECORD SETTING>
NO
1 1
2 2
3 3
4 4
5. Press the ENTER button again.
• The background of the setting item turns red and flashes.
<RECORD SETTING>
NO
1
2
3
4
The menu screen is not cleared even when
pressing the SET UP button while the setting item is
flashing.
6. Press the JOG
press the ENTER button.
• Setting item is determined and flashing stops.
<RECORD SETTING>
NO
1
2
3
4
, buttons to move the cursor to
, buttons to move the cursor to
PPS GRADE A-PPS A-GRADE
3.125P STD 3.125P STD
3.125P STD 3.125P STD
3.125P STD 3.125P STD
3.125P STD 3.125P STD
ALARM CH
CLEAR:BACK
D H M
" and then press
1
PPS GRADE A-PPS A-GRADE
3.125P STD 3.125P STD
3.125P STD 3.125P STD
3.125P STD 3.125P STD
3.125P STD 3.125P STD
PPS GRADE A-PPS A-GRADE
3.125P STD 3.125P STD
3.125P STD 3.125P STD
3.125P STD 3.125P STD
3.125P STD 3.125P STD
, buttons to select "1.25P" and then
PPS GRADE A-PPS A-GRADE
1.25P STD 3.125P STD
3.125P STD 3.125P STD
3.125P STD 3.125P STD
3.125P STD 3.125P STD
5S
OFF
25