Fanimation The Marea FP8026 Owner's Manual page 9

Assembling and Mounting the Fan Blades (Cont'd)
4. Assemble the blade holder assembly to the support
rod. Postion the blade holder assembly and align the
screws holes. (Figure 11)
5. Secure the blade holder assembly to the support
rod using the 1/8-27 hex nut w/ lockwashers.
(Figure 12)
6. securely tighten the hex nut with wrench.
Make sure the nuts with lockwashers securely tighten
the blade holder assembly to the support rods.
(Figure 13)
Blade holder
Assembly
HARDWARE USED:
1/8-27x10 mm
HEX NUT
LOCK WASHER
9
Figure 11
Spport rod
Blade holder
Assembly
Figure 12
x 2
x 2
Wrench
Figure 13