1 REPORT MODES
REPORT TYPE
X
Z
X2
Z2
NOTE : If you don' t want to open the drawer when the reports are run,
set SYSTEM OPTION ADDRESS 5 to value ' b' . ( Page 22 )
NOTE : You can not print the X2 and Z2 reports during training mode.
2 CASH DECLARATION
If the compulsory cash declaration is programmed ( SYSTEM OPTION ADDRESS 5 ),
the cash declaration must be performed in " X / Z"
CASH/TEND
START
NOTE : After doing cash declaration in the ' X / Z'
position except the ' X / Z' , the cash declaration function will be lost.
So if you want to print the reports, you should perform the cash declaration again.
TOTALS
Z Counter
Not reset
Not advance
Reset to '0'
Advance
Not reset
Not advance
Reset to '0'
Advance
AMOUNT
REMARKS
Period-to-date report
Period-to-date report
mode prior to taking X / Z reports.
CASH/TEND
OR
CHEQUE
mode, if you turn the control key to any other
CASH/TEND
EXIT
77