Plu To Plu Chain Operation; Plu Entries By Code - Samsung ER-5100 Programming & Operating Manual

9.3 PLU TO PLU CHAIN OPERATION

All preset PLUs in the same chain ( PLU to PLU linking ) will be automatically registered
when the first PLU of the chain is registered.
If a PLU located in the middle of the chain is registered, the following preset PLUs will be
automatically registered.
EX ) PLU 1000 is linked to PLU 50.

9.4 PLU ENTRIES BY CODE

This cash register can register PLU not only sequential index ( 1 ~ 1000 ) but also code up to 8
digits. If you want to register PLU by code, you must set SYSTEM OPTION ADDRESS 9 to 1.
Although you don' t program PLU code, each PLU has a default code that is same as the PLU
number.
NOTE : PLU entries by code is same to PLU entries by sequential index.
1 2 3 4 5 6 7 8
PLU CODE
1 0 0 0
PLU
AMOUNT
2 0 0 1 0
PLUCODE
PLU
PLU
55