Samsung ER-5100 Programming & Operating Manual page 4

< THE FABRICATION OF REWIND SPINDLE >
( 1 ) Locate the black plastic rewind spindle ( A ) in the Styrofoam.
( 2 ) Locate the black plastic rewind spindle ( B ) in the manual bag.
( 3 ) Fabricate the black plastic rewind spindle ( A ) and ( B ) as shown in the illustration.
STEP 3.2 LOADING THE RECEIPT PRINTER
( 1 ) Place the other paper rolls into the small tray on the left.
Make sure the paper will unwind from the bottom of the roll.
( 2 ) Fold back about 6 inches of paper and insert the folded end of the tape into the feed slot
just in front of the paper tray at the rear of the printer.
( 3 ) Press the " RECEIPT FEED"
Run 3 ~ 4 inches of paper through the printer.
( 4 ) Replace the printer cover and make sure that the receipt paper comes out through the
opening in the printer cover.
NOTE : Do not pull the paper back through the printer as this may damage it.
key on the keyboard until the paper comes through the printer.
PRINTER
CORRECT
PRINTER
INCORRECT
3