Validation Operation - Samsung ER-5100 Programming & Operating Manual

24 VALIDATION OPERATION

First of all, place a check or slip into the slot below the receipt / detail printer.
Upon pressing of the " VALID"
RECD ACCT & PAID OUT operation, % key entries, merchandise return, voids and
tendering operations.
If an operation is programmed as " Validation Compulsory" , the cash register will not operate until
validation is completed and the message " S P" will appear on the display.
If any other operations are attempted before validation, an error will occur.
Refer to SYSTEM OPTION ADDRESS 20 ( Page 23 )
* SAMPLE VALIDATION RECEIPTS *
< RECEIPT SIDE >
01
a
01
a
* Date ( b ) = SYSTEM OPTION ADDRESS 25 = 1 ( MM/DD/YY ). ( Page 24 )
01
a
* Date ( b ) = SYSTEM OPTION ADDRESS 25 = 2 ( YY/MM/DD ). ( Page 24 )
a = Clerk number.
b = Date.
c = Time.
d = Receipt consecutive number.
e = Registration step.
f = Validated transaction content.
key, validation will be performed on department and PLU entries,
< JOURNAL SIDE >
251296 14:10 000068 RTN
b c
122596 14:10 000068 DPT
b c
961225 14:10 000068 AMT
b c
APPLE
d e
DEPT.3
d e
CASH
d e
-10.00
f
£10.00
f
£10.00
f
73