Trouble Shooting; Memory Protection Battery; Specification - Samsung ER-5100 Programming & Operating Manual

TROUBLE SHOOTING

Check the following items if the cash register does not work correctly !!
* Is the power cord plugged into the main socket correctly ?
* Is the wall outlet supplying power ?
Try plugging in another appliance.
* Is the control lock in the correct position ?
* Did you change the position of the control lock during registration of the transaction ?
If you set the control lock to another position while registration is in progress, an error will occur.
Return to the previous control lock position and press the correct keys to finalize the original transaction
before changing the control lock setting.

MEMORY PROTECTION BATTERY

Totaled sales and other items are protected during power failures by a built in memory protection
battery.
The memory protection battery is charging when the power is on and discharging when the power is
off. This cause the capacity of the battery to decrease after about one year of use.
A label on the back of the cash register shows the normal service period of the battery installed in your cash
register.
NOTE : A weak battery has the potential of losing valuable transaction data.

SPECIFICATION

POWER
CABINET
PRINTER
DISPLAY
DRAWER
WEIGHT
DIMENSION
USAGE CONDITION
NOISE
AC 230 V , 50 Hz
ABS ( V0 )
ERP-300V ( 2 STATION DOT-MATRIX PRINTER )
FRONT 10 DIGITS / REAR 10 DIGITS
METAL ( 8 COINS / 4 BILLS )
15.0 Kg
SET = 374 (W) x 458 (D) x 195 (H)
TEMPERATURE : 0 C ~ 40 C
UNDER 70 dB
DRAWER = 400 (W) x 450 (D) x 111 (H)
( Including foot )
HUMIDITY : 10 % ~ 90 %
85