Connections; User Console; Computer Systems - ADDER CCS4-USB Manual

Connections

Connections do not need to be carried out in the order given within this guide,
however, where possible connect the power in as a final step

User console

The ports that make up the user console are where you attach the peripherals
which will be shared between the computer systems. Ensure that power is
disconnected from the switch.
To connect peripherals to the user console
1 Position your peripheral devices in the vicinity of the switch such that their
cables will easily reach.
2 Keyboard and mouse: Attach the leads
from your USB keyboard and mouse to
the USB sockets specifically labelled with
keyboard and mouse symbols. The keyboard
and mouse will operate in any of the USB
True Emulation
sockets, however,
available on sockets labelled USB1
or USB2.
3 USB devices: Where required, attach the leads from
your USB peripherals to the USB sockets labelled
USB1 and USB2.
From USB peripherals
I N
D O
O R
U S
E
O N
L Y
5 V
2 .5
A
is not
O P
T IO
N S
From USB keyboard and mouse
1
4 Audio: Where required, connect the lead from
your speakers to the audio socket.
From speakers

Computer systems

Each computer system is connected to the CCS4-USB switch using (up to) two
cables.
To connect a computer system
1 Ensure that power is disconnected from the CCS4-USB switch and the
system to be connected.
2 Use a USB cable (type-A to type-B) to link a USB
port on the computer system to the USB port of the
required channel on the rear of the switch.
3 If required, use a stereo audio link cable (3.5mm
jacks at either end) to link the speaker
port on the computer system to the
audio port of the required channel
on the rear of the switch.
USB and audio
links to a system
I N
D O
O R
U S
E
O N
L Y
5 V
2 .5
A
O P
T IO
N S
2
1
8