Additional Free-Flow Operations And Settings - ADDER CCS4-USB Manual

Additional Free-Flow operations and settings

In addition to the core configuration functions, Free-Flow has a number of
additional settings that you can make.
Mouse... (acceleration) setting
Acceleration
Mouse acceleration allows you to move the mouse pointer quickly across the
large areas of the screen in response to small but sharp shifts in the mouse
position. The Configure > Mouse... option provides settings between 0 and 50,
however, a value of 12 to 15 will give a typical Windows-like default operation.
Mouse parking... setting
Mouse parking allows you to optionally determine where the mouse pointer
for each system should be placed when the focus moves to a different system/
video screen. The Configure > Mouse parking... option displays vertical and
horizontal scroll bars. Use the scroll bars to pinpoint the position that should be
used to park the dormant mouse on each screen.
Switch... settings
Enable (Disable) Free-Flow
This option allows you to switch off the Free-Flow feature within the CCS4-USB
switch. Located within Configure > Switch... menu item, untick the Enable
Free-Flow checkbox and download the configuration the CCS4-USB switch to
disable.
Start-up Port
Located within Configure > Switch... menu item (see above image), this option
allows you to determine which port should be enabled whenever the CCS4-USB
switch is first powered on.
Switch Mode
Located within Configure > Switch... menu item (see above image), these
check boxes allow you to determine which peripherals should be switched
whenever the channel is changed by the Free-Flow method. The switching of
peripherals via the other methods of channels selection (e.g. the front panel,
hotkeys, mouse buttons, etc.) remain unaffected by these settings. By default,
the Keyboard/Mouse and Audio are selected.
20