The Information Mode/Demo Mode - Pro-Form 400 GI User Manual

THE mNFORMATmONMODE/DEMO MODE
The consob features an information mode that keeps
track of the totaU number of hours that the treadmHUhas
been operated and the totaUnumber of miles that the
waUking beUthas moved, The information mode aUsoaP
bws you to sebct miles or kilometers as the unit of
measurement and to turn on and turn off the demo
mode,
To sebct the information mode, hoUddown the Stop
button while inserting the key into the consob, When
the information mode is sebcted, the following informa-
tion wHU be shown in the dispUay:
The bft side of the dispUay
will show the total number of
miles (or kilometers) that the
walking belt has moved and
the total number of hours
3 E
Mile Is _Hours
that the treadmill has been used, An "E" for English
miles or an "M" for metric kilometers will appear in the
right side of the display, Press the Speed + button to
change the unit of measurement,
IMPORTANT: if a "d" appears in the right side of the
display, the console is in the "demo" mode, This mode
is intended to be used only when a treadmill is dis-
played in a store, When the console is in the demo
mode, the power cord can be plugged in, the key can
be removed from the console, and the indicators in the
display will automatically appear in a preset sequence,
although the buttons on the console will not operate, If a
"d" appears when the information mode is seJected,
press the Speed - button so "d" disappears.
To exit the information mode, remove the key from the
console,
22