Pro-Form Stride Select 825 User Manual page 8

Slide the Right Crank Arm (38) onto the four indicated
welded bolts; make sure that the Right Crank Arm is
in the indicated cutout in the Pedal Disk (8). Next,
finger tighten four M8 Jamnuts (101) onto the welded
bolts, Then, fully tighten one of the Jamnuts, and then
tighten the Jamnut farthest from the first Jamnut, Then,
tighten the remaining two Jamnuts,
Attach a Hub Cover (48) to the Right Crank Arm (38)
with four Cover Screws (82). Then, tighten an
Adjustment Knob (45) onto the right Adjustment Pin (17),
Attach two Pedal Posts (16) to the Left Pedal Arm (14)
with two M8 x 16mm Button Screws (84) and two M8
Washers (53),
Attach the other Pedal Posts (not shown) to the Right
Pedal Arm (75) in the same way,
Attach one of the Pedals (12) to the Left Pedal Arm
(14) with two M4 x 16ram Screws (66),
Attach the other Pedal (not shown) to the Right Pedal
Arm (not shown) in the same way,
Cutout
8 _, /
14
16
14
\
\
66
\
12
66
84