Rigging The Ws-8460; Storing The Machine - Wachs WS-8460 User Manual

Diamond Wire Saw User's Manual
12

Rigging the WS-8460

You can lift the WS-8460 saw vertically, or in either hori-
zontal orientation. See the following figures for lift points.
Lift horizontally from these three points
Lift vertically from this point only
Figure 1-13. Use the lift points indicated to lift the
machine horizontally or vertically.
Figure 1-14. To lift the machine horizontally from the
other side, use the three points indicated in the photo
(third point is out of view under frame).

Storing the Machine

Store the machine sitting horizontal with the front of it (the
side with the Wachs logo) facing up. For long-term storage,
Part No. 10-010-MAN, Rev. 1-0310 E.H. Wachs