Topside Control Panel - Wachs WS-8460 User Manual

Figure 1-7. The photo shows the clamping cylinder
extended and the clamp arm secured against the pipe.
The frame of the machine has clamp shoes attached that the
machine rests upon when installed on the pipe. These shoes
are made of a compressible composite material that deforms
slightly under pressure to create a secure, slip-free grip on
the pipe when the machine is clamped.
Figure 1-8. The front mounting shoes are shown.

Topside Control Panel

Figure 1-9 illustrates the controls used to operate the subsea
wire saw. Chapter 3 includes detailed instructions.
E.H. Wachs
Chapter 1, About the Diamond Wire Saw: Equipment Description
Part No. 10-010-MAN, Rev. 1-0310 9