Oki OL 1200ex Setup Manual page 53

4-18 HP LaserJet IV Emulation
(b)
This command designates the source images transparency mode.
(c)
027 042 118 # 079 (111)
(d)
This command designates the rectangle width in decipoints.
(e)
This command designates the rectangle width in dots.
(f)
This command designates the rectangle height in decipoints.
(g)
This command designates the rectangle height in dots.
Select Source Transparency
ESC*v#N
027 042 118 # 078 (110)
1B 2A 96 # 4E (6E)
Select Pattern Transparency
ESC*v#O
1B 2A 76 # 4F (6F)
Horizontal Rectangle Size in Decipoints
ESC*c#H
027 042 099 # 072 (104)
1B 2A 63 # 48 (68)
Horizontal Rectangle Size in Dots
ESC*c#A
027 042 099 # 065 (97)
1B 2A 63 # 41 (61)
Vertical Rectangle Size in Decipoints
ESC*c#V
027 042 099 # 086 (118)
1B 2A 63 # 56 (76)
Vertical Rectangle Size in Dots
ESC*c#B
027 042 099 # 066 (98)
1B 2A 63 # 42 (62)
# = 0 Transparent: The white
pixels in the source are not
copied on to the destination.
# = 1 Opaque: The white pixels
in the source are copied in white
directly on to the destination.
# = 0 Transparent: The white
pixels in the pattern image are
not copied on to the destination.
# = 1 Opaque: The white pixels
in the pattern image are copied
directly on the destination.
# = Number of Decipoints (
# = Number of dots (
# = Number of decipoints (
# = Number of dots (
1
/ inch)
720
1
/ inch)
300
1
/ inch)
720
1
/ inch)
300