Table of Contents
Advertisement
(i)
Clear Horizontal Margin
ESC9
027 057
1B 39
This command resets the right and left margins to the logical page right and logical
page left respectively.
(j)
Perforation Skip
ESC&l#L
027 038 108 # 076 (108)
1B 26 6C # 4C (6C)
When enable is set, the perforation area (from the bottom margin on the current page
to the top margin on the next page) is automatically skipped at the bottom of the length
of text. If a fine line feed runs past the bottom margin given in the text length
command, the ESC&l1L command will allow the printer to automatically advance to
the start of the text at the top of the next page, ejecting the current page from the
printer.
The command, ESC&l0L will disable this feature.
Note: This command will interfere with any page length formatting that is
!
controlled by any software.
(k)
Horizontal Motion Index (HMI)
ESC&k#H
027 038 107 # 072 (104)
1B 26 6B # 4B (68)
This command designates the width of the columns.
10 CPI
12 CPI
15 CPI
20 CPI
# =
# =
# =
120
12 HMI
HMI =
CPI
10 HMI
8 HMI
6 HMI
HP LaserJet IV Emulation 4-9
0 Disable
1 Enable
(Default = Enable)
1
number of
/
inch increments
120
(Default = 12)
Advertisement
Table of Contents
