MSI MS - 9211 User Manual page 71

MS-9211 1U Rackmount Server
Normal
IrDA
ASKIR
RxD, TxD Active
This setting controls the receiving and transmitting speed of the IR peripheral
in use. Setting options: Hi/Hi, Hi/Lo, Lo/Hi, Lo/Lo.
IR Transmission Delay
This setting determines whether the IR transmission rate will be delayed while
converting to receiving mode. Setting options: Disabled, Enabled.
UR2 Duplex Mode
This setting controls the operating mode of IR transmission/reception. Setting
options: Full, Half. Under Full Duplex mode, synchronous, bi-directional trans-
mission/reception is allowed. Under Half Duplex mode, only asynchronous,
bi-directional transmission/reception is allowed.
Use IR Pins
Please consult your IR peripheral documentation to select the correct setting
of the TxD and RxD signals. Setting options: RxD2/TxD2, IR-Rx2Tx2.
PWRON After PWR-Fail
This setting specifies whether your system will reboot after a power failure or
interrupts occurs. Available settings are:
Off
On
Former-Sts
Power Status LED
This item configures how the system uses power LED on the case to indicate
the sleep state. Available options are:
Single The power LED blinks to indicate the sleep state without chang-
ing its color.
Dual The power LED changes its color to indicate the sleep state.
3-20
RS-232C Serial Port
IrDA-compliant Serial Infrared Port
Amplitude Shift Keyed Infrared Port
Leaves the computer in the power off state.
Reboots the computer.
Restores the system to the status before power failure or
interrupt occurs.