Nortel 1220 User Manual page 16

Regulatory and safety information
address: Ingolstaedter Strasse 14-18, 80807 Munich Germany The
following table lists EMC compliance for various jurisdictions
Table 3: EMC compliance
Jurisdiction
United States
Canada
Australia/New
Zealand
European
Community
Note: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own
expense.
16
Standard Description
FCC CFR 47 Class A Emissions: FCC Rules for
Part 15 Radio Frequency Devices (see Notes
1 and 2)
ICES-003 Class A Emissions: Interference-
Causing Equipment Standard: Digital
Apparatus
AS/NZS 3548 Class A Emissions: Information
CISPR 22 technology equipment - Radio
disturbance
EN 55022 Class A Emissions: Information
technology equipment - Radio
disturbance
EN 55024 Information technology equipment -
Immunity characteristics
Limits and methods of measurement
EN 61000-3-2 Limits for harmonic current emissions
(equipment input current <= 16 A per
phase)
EN 61000-3-3 Limitation of voltage fluctuations and
flicker in low-voltage supply systems
for equipment with rated current <= 16
A