Nortel 1220 User Manual page 134

Operating your IP Phone 1220
Using Automatic Preselection (Meet-Me page)
Perform the following procedure to use Automatic Preselection.
(Goodbye)
or
Using Automatic Post-selection
The called party is either busy on the IP Phone or away from their desk.
To page the called party, you need not redial the number of the called
party.
RadPag
134
1. Lift the handset.
2. Dial the Radio Paging Access
You hear the paging tone (two beeps
followed by a dial tone).
3. Dial the number of the party you want to
page.
After dialing, you hear the ringback tone.
The paged party can use any IP Phone
to enter a Radio Paging Answer
and their own DN number.
4. If your call remains unanswered for a
preset time period, during which you
hear a 15-second high-pitched tone
sounds followed by silence, press the
Goodbye key or replace the handset.
1. Press the RadPag
You hear a special dial tone.
FFC.
FFC
soft key.