Heath Zenith 598-1109-06 Owner's Manual page 4

Chime with Attached Decorative
Cover:
1. Mount hanger to chime (hanger
may be pre-assembled):
• Place hanger over predrilled
holes (either in top or bottom
panel).
• Connect hanger to chime using
2 #4 screws (provided).
2. Determine where chime is to be
mounted.
3. Drill 1/4" diameter pilot hole for
wall anchor (provided) and insert
anchor.
4. Screw #8 screw (provided) into anchor. Leave 1/16" gap between screw head
and wall.
5. Place hanger over screw to mount chime.
Hanger
#4 Screws
-4-
Predrilled
Figure 7
598-1109-06
Hanger
Holes