Hard Disk - Canon LBP5360 User Manual

NOTE
Be sure to use a 3.3V SDRAM DIMM compatible with this printer as the expansion RAM
module. It is recommended that you should use Canon Expansion RAM ER-128 or
ER-256 as the expansion RAM.
SDRAM DIMM (3.3V) compatible with this printer

Hard Disk

You can use a hard disk that can be built in the printer to save the received print
jobs temporarily. By installing the hard disk, you can use various functions such as
print job spooling, encrypted secured print, secured print, electronic sort, and RIP
Once.
IMPORTANT
When you are using a hard disk, set MODE TIMEOUT in the SETUP menu to a setting
other than OFF. It is recommended that you should specify the default setting, "15
seconds".
Usable
Notch
Hard Disk KIT HD-93
Optional Accessories 1-15
1