Canon LBP5360 User Manual page 362

Remedy 3 If you are using UFR II Printer Driver, set [Graphics Mode] to [Raster Mode],
[Rendering Rate] to [24 BPP], and [Gradation] to [Standard] to set [Color
Halftones] or [B & W Halftones] to [Error Diffusion].
In order to specify the setting for [Graphics Mode], [Rendering Rate],
[Gradation], [Color Halftones], or [B & W Halftones], display the [Detailed
Settings] dialog box by clicking [Details] in the [Quality] sheet.
The displayed color and printed color differ when printing photos, etc.
Cause The method for adjusting color on the screen (RGB) and in the printer (YMC) is
different. Therefore, there may be cases when the color on the screen cannot
be printed out exactly as it appears.
Remedy 1 Set [Matching Method] to [Perceptual [Monitor Color Matched]] in the printer
driver.
In order to specify the setting for [Matching Method], display the [Matching]
sheet by selecting the [Manual Color Settings] check box in the [Quality] sheet,
and then clicking [Color Settings].
Remedy 2 Adjust [Gamma] in the printer driver.
In order to specify the setting for [Gamma], display the [Matching] sheet by
selecting the [Manual Color Settings] check box in the [Quality] sheet, and then
clicking [Color Settings].
Streaks appear in the gradated portions when printing diagrams with gradations.
Cause Gray compensation is applied to the gray color portions of the "streaks" in the
diagrams.
Remedy Set [Gray Compensation] to [Off] in the printer driver.
In order to specify the setting for [Gray Compensation], display the following
dialog box.
- For UFR II Printer Driver: Display the [Advanced Settings] dialog box by
clicking [Details] in the [Quality] sheet, then clicking [Advanced Settings] in the
[Detailed Settings] dialog box.
- For PCL Printer Driver: Display the [Detailed Settings] dialog box by clicking
[Details] in the [Quality] sheet.
When You Cannot Obtain Appropriate Printout Results
8
8-63