Canon LBP5360 User Manual page 333

Cause 2
Remedy
<0F OPT.CONN.ERR.>
Cause
Remedy
<11 NO "size" PAPER>
Cause
Remedy 1 Refill or load paper.
Remedy 2 Press the
8
<12 COVER OPEN>
Cause
Remedy
<13 PAPER JAM>
Cause
Remedy
IMPORTANT
• If paper jams have occurred at multiple areas at the same time, the areas appear in the
display by rotation.
• If you have removed the jammed paper without opening any cover, be sure to open and
close the front cover or top cover once, and then press the
8-34 Message List
When printing after the paper is changed from narrower one to wider one, the
printer cools down the fixing unit so that the print quality is maintained.
Please wait a moment. The printer cools down the fixing unit automatically. If
the message appears in the middle of printing, the printer resumes the job after
finishing the cool down process. If the message appeared after the job, the
message disappears and the printer stops operation after the cool down
process, and the printer becomes ready to print.
The duplex unit is not installed properly.
Turn the power OFF, install the duplex unit properly, and then turn it ON again.
(See "When the Duplex Unit Is Not Installed Properly," on p. 8-27)
Paper of the size specified in the application is not loaded in the paper source
(in all the paper sources when PAPER SOURCE is set to AUTO; in the specified
paper source when the setting is fixed).
(Feeder Selection) key, then select other paper source for the
same paper size or larger paper size. (See "Selecting a Paper Source," on p.
4-13)
The front cover or top cover is open.
Close the front cover or top cover firmly. If the printer is not online, press the
(Online) key.
Paper is jammed inside the printer
Remove the jammed paper and set the paper cassette and covers to the
original position. If the printer is not online, press the
"Paper Jams," on p. 8-4)
(Online) key. (See
(Online) key.