Troubleshooting Checklist - Fisher & Paykel CG365C Installation Instructions And User Manual

IIII nsta lll!a(non inst uct" nons
Checking the gas type
B_'_@_s NG Odfic@ NG IIi,,,P O dfic@ IIiJP
(ram) BTU (MJ/h) @ (ram) BTU (MJ/h) @
0.15 psi (4"W.C.) 0.41 psi (11 "W.C.)
RH Rear (Rapid) 1.3 mm 8,000 (8.4 MJ/h) 0,8 mm 8,200 (8,7 MJ/h)
LH Rear (Semi-rapid) 1.1 mm
5,800
(6.1 MJ/h) 0.7 mm
5,700
(6.0 MJ/h)
RH Front (Auxiliary) 085 mm 3,000 (3.2 MJ/h) 0,55 mm 3,500 (3.7 MJ/h)
LH Front (Rapid) 1.3 mm 8,000 (8.4 MJ/h) 0.8 mm 8,200 (8.7 MJ/h)
CG365C Center (Wok) 1.75 mm 14,000 (14.8 M J/h) 1.05 mm 13,000 (13.7 MJ/h)
CG365D Center (Wok) Z15 mm 20,000 (21.1 M J/h) 1.22 mm 19,000 (20 M J/h)
Clamping down the cooktop
PBacethe cooktop into the cutout and tighten it
with the suppBied clamps. These will cope with
the countertop thicknesses %"_ 2" (19 - 50 ram)
when used in the two orientations shown.
Do not over tighten,
Troubleshooting
check list
• = check
Burners correctly assembled?
Dirty ignitors?
Gas pressure correct?
Low setting correct?
InJectors incorrect or blocked?
Power supply polarity/grounding OK?
Supply voltage OK?
Draft/extraction? (advise the custome_
Slow to ignite
or yellow
flames?
All Individual
Burners Burner
Doesn't
ignite?
All Individual
Burners Burner
Doesn't
stop
sparking?
Doesn't
stay lit?