Activate Multi-Screen Behavior - Intergraph Intense 3D Pro 3600 Installation Manual

To verify the default video display driver:
1. From the operating system Start menu, go to Settings/Control
Panel/System.
2. On the Startup/Shutdown tab, verify that Windows NT
Workstation Version 4.00 is selected in the Startup list. If it is
not, select it from the list and click Apply.
3. Click OK to close the System dialog.
NOTE Do not select the VGA version of the operating system. The video
display runs in VGA mode when the Intense 3D Pro 3600 driver is
not running.

Activate Multi-Screen Behavior

If your computer is configured for multi-screen display (with multiple
Intense 3D Pro 3600 cards installed), the video display driver treats
the combined display area as a single canvas that covers all screens.
In this Full Canvas style, windows centered on the canvas may be split
between screens. This includes most system dialog boxes.
To activate multi-screen behavior:
1. From the operating system Start menu, go to Settings/Control
Panel/Display/Intergraph Monitor.
2. Select the desired monitor orientation, and click Apply.
3. Click OK to exit the Display Properties dialog.
4. Click Yes to restart your computer. You must restart the
computer for the change to take effect.
11