Basic Controls - Bertazzoni SO24PROX Instruction Manual

USA

Basic controls

Setting the clock
After your microwave oven is first plugged in
or after a power failure, the clock display will
flash to indicate that the time shown is not
correct. To set the clock, proceed as follows:
1. Press the Clock key. The hour numbers will
start to flash.
2. Press key "-" and "+" to set the hours.
Hiding/Displaying the Clock
If the clock display disturbs you, you can hide
it by pressing the Clock key for 3 seconds.
The dots that separate the hours and minutes
will flash but the rest of the clock display will
be hidden.
Safety blocking
The oven functioning can be blocked (for
example, to stop it being used by children).
1. To block the oven, press the Stop key for 3
seconds. You will hear a sound signal and
the display will show the word "SAFE". The
2,4
23:15
1,3,5
3. Press again the Clock key to set the
minutes. The minute numbers will start to
flash.
4. Press key "-" and "+" to set the minutes.
5. To finish, press the Clock key again.
If you want to see the clock display again,
press the Clock key again for 3 seconds.
SAFE
oven is blocked in this state and cannot be
used.
2. To unblock the oven, press the Stop
key again for 3 seconds. You will hear a
sound signal and the display will show
the time again.
13
1,2 (>3s)