Yamaha Disklavier E3 Operation Manual page 83

Chapter
8
Advanced Recording
3
Press [
to change the tempo, then press [ENTER].
4
Press [FUNC.] three times.
×3
For measures and beats, the current song tempo (bpm) is shown.
=Memory=
TEMPO=117bpm
VOLUME=
For minutes and seconds, the current song tempo is shown as
"000%."
=Memory=
TEMPO=+000%
5
Press [+/YES] and [–/NO] to change the tempo.
[+/YES] increases the tempo, and [–/NO] decreases the tempo.
For measure and beats, the tempo range is from 30 bpm to 400
bpm.
For minutes and seconds, the tempo range is from –75% to
+242%.
6
Press [STOP] to save the tempo change.
The following screen appears.
The following table gives a description of each of the options.
Option
SAVE
NEW
CANCEL The song with a new tempo is discarded. The original
64
] and [ ] to select the song in which you want
 -+
 =4/4
  SOUND=BUZZER
-+
=Memory=
Save to Disk?
*SAVE *NEW *CANCEL
Description
The song is saved at its new tempo under the current
song number.
The song is saved at its new tempo under a new song
number. The original song is kept under the previous
song number.
song is kept under the previous song number.
 ENT
Note:
You cannot change the beat setting
on the prerecorded songs.
Note:
The sound parameter does not
appear when the quiet or headphone
mode is activated on models
equipped with the Silent Piano™
function.