Yamaha Disklavier E3 Operation Manual page 76

4
To change the volume, move the cursor to the volume
parameter ("VOLUME") with the cursor buttons ([
[ ] [ ]), then press [+/YES] and [–/NO].
The volume can be adjusted in 4 steps.
5
To change the sound, move the cursor to the sound
parameter ("SOUND") with the cursor buttons ([
[ ] [ ]), then press [+/YES] and [–/NO].
The following sound settings are available: BUZZER, TG
6
Press [RECORD] in the metronome setting screen.
The metronome recording setting screen appears.
=Memory=
TEMPO=125bpm =3/4
VOLUME= VOLUME=
7
Press [PLAY]
Recording begins immediately.
[PLAY/PAUSE], [REC] and [SELECT] on the control unit flash
simultaneously at the first beat of the metronome.
8
Start playing your song.
9
Press [STOP] when you finish playing your song.
The recorded song is loaded.
=METRONOME=
TEMPO=125bpm =3/4

VOLUME= VOLUME= SOUND=BUZZER
=METRONOME=
TEMPO=125bpm =3/4

VOLUME= VOLUME= SOUND=TG
_?=]
-+

SOUND=TG
] [ ]
_?=]
-+
Note:
The sound parameter does not
] [ ]
appear when the quiet or headphone
mode is activated on models
equipped with the Silent Piano™
function. The metronome sound is
_?=]
fixed to "TG."
-+
Chapter
8
Advanced Recording
57