Yamaha Disklavier E3 Operation Manual page 24

[BACK] button
9
Used to cancel the selection, and return to the
previous screen.
10 [VOLUME] buttons (
Used to adjust the volume.
[–] lowers the volume, [+] raises the volume.
11 [TEMPO] buttons
Used to change the playback tempo.
[–] decreases the tempo, [+] increases the tempo,
and [0] resets the tempo to 00.
[TRANSPOSE] buttons
12
Used to transpose song playback.
[–] transposes down, [+] transposes up, and [0]
resets the transposition value to 00.
13 [INTERNET] button
Used to access the Internet menu.
14 [SEARCH] button
Used to access the search function.
[SETUP] button
15
Used to access the setup menu.
[METRONOME] button
16
Used to access the metronome function.
[REPEAT] button
17
Used to select one of the repeat modes: ALL, RPT,
RND, or OFF.
[A-B] button
18
Used to enter A and B points for the A-B repeat
mode.
19 [PART SELECT] buttons
For L/R and ensemble songs, these buttons are
used to choose which part will play: left-hand part,
right-hand part, or both parts.
They are also used to select a part for recording.

page 27)

[PAUSE] button (
20
Used to pause playback.

[STOP] button (
21
Used to stop playback and recording.
[ENTER] button
22
Used to execute the selection.
[FUNC.] button
23
Used to access the function menu.
[SELECT] button
24
Used to select media.
[+/YES]/[–/NO] buttons
25
Used to select parameters, adjust setting values,
and execute or cancel the selected functions.
[BALANCE] button
26
Used to adjust the TG, audio and voice balance.
Color buttons
27
Green: Used to execute the shortcut assigned to
the number keypad.
Yellow: Used to switch character types when titling
albums and songs.
Red: Used to switch the Disklavier to the
acoustic mode*.
Blue: Used to switch the Disklavier to the quiet
mode*.
* Only for grand pianos equipped with the Silent Piano™
function.
Introduction
page 22)
page 22)
Chapter
1
5