Download Print this page

Panasonic CZ-RTC2 Instruction Manual

Timer remote controller.
Hide thumbs
Most useful pages: More

Advertisement

Authorized representative in EU
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
Save These Instructions!
Conserver ce mode d'emploi!
Diese Anleitung aufbewhren!
Conservare queste istruzioni!
Guarde estas instruções!
Εκτός αττό αυτές τις οδηγίες!
Guarde estas instruccónes!
Сохраните эту инструкцию!
Збережіть ці інструкції!
Timer Remote Controller
Télécommande de minuterie
Zeitschaltuhr-Fernbedienung
Telecomando del timer
Controlador remoto do temporizador
Τηλεχειριστήριο χρονοδιακόπτη
Controlador remoto del temporizador
Пульт дистанционного управления таймером ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
Пульт дистанційного керування із таймером
Printed in China
85464609073024
CZ-RTC2
INSTRUCTION MANUAL
MANUEL D'INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUAL DI ISTRUZIONI
MANUAL DE INSTRUÇÕES
ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ
MANUAL DE INSTRUCCIONES
ПОСІБНИК КОРИСТУВАЧА
Contents
1. Important Safety Instructions ................... EN-1
4. Weekly Program Function ........................ EN-6
2. Names and Operations ............................ EN-2
5. Outing Function ...................................... EN-11
3. Setting the Present Time .......................... EN-5
6. Sleeping Function .................................. EN-13
Table des matières
1. Mesures de sécurité importantes ............ FR-1
4. Fonction de programmation hebdomadaire . FR-6
2. Noms et fonctionnement .......................... FR-2
5. Fonction de maintien .............................. FR-11
3. Réglage de l'heure actuelle ..................... FR-5
6. Fonction de sommeil .............................. FR-13
Inhalt
1. Wichtige Sicherheitshinweise ................... DE-1
4. Funktion der Wochen-Programmierung ...... DE-6
2. Bezeichnungen und Funktionen ............... DE-2
5. Outing-Funktion ..................................... DE-11
3. Einstellung der aktuellen Zeit ................... DE-5
6. Schlaf-Funktion ...................................... DE-13
Indice
1. Importanti istruzioni di sicurezza .................IT-1
4. Funzione del programma settimanale .........IT-6
2. Nomi e operazioni .......................................IT-2
5. Funzione stanza vuota ..............................IT-11
3. Impostazione del tempo presente ...............IT-5
6. Funzione del sonno ...................................IT-13
Índice
EN
1. Instruções de segurança importantes ....... PT-1
4. Função do programa semanal .................. PT-6
2. Nomes e operações .................................. PT-2
5. Função de controlo ................................. PT-11
FR
3. Defi nir a hora............................................. PT-5
6. Função de adormecimento ..................... PT-13
Πίνακας περιεχομένων
DE
1. Σημαντικές οδηγίες για την ασφάλεια ......GR-1
4. Λειτουργία εβδομαδιαίου προγράμματος .GR-6
2. 0νομασίες και λειτουργίες ........................GR-2
5. Λειτουργία εξόδου αέρα ......................... GR-11
3. Ρύθμιση της τρέχουσας ώρας ..................GR-5
6. Λειτουργία εξοικονόμησης ενέργειας .....GR-13
IT
índice
PT
1. Instrucciones de seguridad importantes ..... ES-1
4. Función de programación semanal .......... ES-6
2. Nombres y funciones ............................... ES-2
5. Función de control de la temperatura .... ES-11
3. Ajuste de la hora actual............................ ES-5
6. Función de apagado automático ............ ES-13
GR
Содержание
1. Важные инструкции по безопасности ... RU-1
4. Функция еженедельной программы ...... RU-6
ES
2. Названия и операции ............................. RU-2
5. Функция выключения ........................... RU-11
3. Установка текущего времени ................ RU-5
6. Функция сна .......................................... RU-13
RU
Зміст
1. Важливі заходи безпеки ......................... UK-1
4. Режим «Програмування на тиждень" ... UK-6
UK
2. Елементи управління, режими роботи та індикації ... UK-2
5. Режим «Порожня кімната" ...................UK-11
3. Встановлення поточного часу ............... UK-5
6. Режим «Сон" ........................................ UK-13
EN
FR
DE
IT
PT
GR
ES
RU
UK

Advertisement

   Related Manuals for Panasonic CZ-RTC2

   Summary of Contents for Panasonic CZ-RTC2

  • Page 1

    4. Режим «Програмування на тиждень» ... UK-6 Panasonic Testing Centre 2. Елементи управління, режими роботи та індикації ... UK-2 5. Режим «Порожня кімната» ....UK-11 Panasonic Marketing Europe GmbH 3. Встановлення поточного часу ....UK-5 6. Режим «Сон» ........UK-13 Winsbergring 15, 22525 Hamburg, Germany...

  • Page 2: Display

    Display/Affi chage/Anzeige/Display/Mostrador/Οθόνη ενδείξεων/ Operating buttons/Boutons de fonctionnement/ Bedienungstasten/Tasti per il funzionamento/Botões de Pantalla/Дисплей/Дисплей funcionamento/Κουμπιά χειρισμού/Botones de funcionamiento/Кнопки управления/Кнопки управління 15 14 29 26...

  • Page 3: Important Safety Instructions

    1. Important Safety Instructions Before using the system, be sure to read these “Important Safety Instructions”. After reading this manual, save it in a convenient place. Note: Warning • This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause Installation Precautions harmful interference, and (2) this device must...

  • Page 4

    2. Names and Operations (Refer to page I ) Operation Section (Start/Stop) button (Ventilation) button Pushing this button starts, and pushing again Use this button when you installed a fan stops the unit. available in the market. Pressing this button turns on and off the fan.

  • Page 5

    (Refer to page II) Display Section 11. Upper and lower limit indication of the (Setting) indication Appears when the timer program is being set. outing function : Indicates the upper limit of the (Unit) indication temperature Indicates the unit No. of the indoor unit which : Indicates the lower limit of the is selected with the Unit select button, or the temperature...

  • Page 6

    2. Names and Operations (Continued) (Refer to page II ) Display Section (Operation mode change control) (Maintenance function) indication indication Appears when the maintenance function Displays when an operation mode is entered (monitoring sensor temperatures) is activated. by the remote control unit, while another (Ventilation) indication operation mode has been already selected.

  • Page 7

    3. Setting the Present Time 1. Press and hold for more than 2 seconds to enter the present day and time setting mode. Once you enter the setting mode, , “ ”(day) and “time” fl ash. 2. Set “ ” to today’s day of the week. Press to move “...

  • Page 8

    4. Weekly Program Function Checking Weekly Timer Set the weekly program assigning a given timer to each day of the week. Maximum of 6 programs a day and 42 programs a week can be set. Select the day and the TIMER number you want to program. Program image diagram Vertical scale indicates the button...

  • Page 9

    • Changing the Program Timer To set the weekly program, follow the steps below. 1. Select the program you want to set in the program confi rmation mode, and press . This enters the setting mode of the program currently displayed. * In the program setting mode, , “hour”, “minute”...

  • Page 10

    4. Weekly Program Function (Continued) 4. Set the program pattern. Pattern 1 (program step 3) There are 4 program patterns. Pressing repeats the following display patterns. Pattern 2 Pattern 1 The indoor unit starts operation at the programmed time. Pattern 2 The indoor unit stops operation at the Pattern 3 programmed time.

  • Page 11

    • Deleting the Program Timer To delete the program timer setting, follow the steps below. 1. Press to enter the program confi rmation mode. 2. Press to select the day of the program you want to delete. 3. Press to select a TIMER No. (from 1 to 6). 4.

  • Page 12

    4. Weekly Program Function (Continued) • Duplicating the Program Timer You can duplicate the preset program by day. Select the copy source. 1. If is pressed in program checking mode , it enters the copy mode (Selecting the copy source ) of the program timer.

  • Page 13

    5. Outing Function Outing function is a function that prevents the room temperature from increasing too much (or decreasing too much) when no one is in the room. An air conditioner works automatically if this function is set effective. General Performance of the Outing Function Outing function upper limit The air conditioner starts operation when the room temperature increases up to –1°C of the upper...

  • Page 14

    5. Outing Function (Continued) • Setting the Outing Function 1. Press and hold for more than 2 seconds to display the upper limit temperature setting screen. and the upper limit temperature start fl ashing. (The default value of the upper limit temperature is 38 °C.) 2.

  • Page 15

    6. Sleeping Function * This function leads you to a comfortable sleep When the off time comes: and changes the room temperature during your • The indoor unit stops. sleep. * The temperature returns to the setting at * You can set the off timer every one hour from 1 the time when sleeping function operation to 10 hours.

  • Page 16

    6. Sleeping Function (Continued) • If button does not work. Or if the operation does not start even if is pressed. Check the following table. Display of the remote control unit Contents Item (Lighting/fl ashing indication) The Error indication fl ashes The clock is not set.

Comments to this Manuals

Symbols: 0
Latest comments: