Panasonic CZ-RTC6WBL Operating Instructions Manual

Wired remote controller

Advertisement

Quick Links

Installation Instructions
separately attached
English
Before operating the unit, read these Operating Instructions thoroughly and keep them for future reference.
Panasonic Corporation
1006 Oaza Kadoma, Kadoma City, Osaka 571-8501, Japan
z Safety precautions .............................................3
z Part names ..........................................................6
• Control panel / Top screen .......................................... 6
• Screen display ............................................................. 7
• Operation guide ........................................................... 7
z Basic operations ................................................8
z Menu list ............................................................ 11
z ECONAVI function ............................................12
z nanoe™ X function ..........................................15
z Filter sign ..........................................................17
z Outing function ................................................18
z Touch sound/Contrast .....................................21
z Backlight/Language .........................................22
z Contact address/Display mode.......................23
z Setting information list ....................................24
®
settings ..........................................26
z Troubleshooting ...............................................58
z Specifications ...................................................61
z Software License Information .........................63
Operating Instructions
Wired Remote Controller
CZ-RTC6BL
Model No.
CZ-RTC6WBL
WEB-ACXF55-27544-EN
Page
F0620-50223

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic CZ-RTC6WBL

  • Page 1: Table Of Contents

    Operating Instructions Wired Remote Controller CZ-RTC6BL Model No. CZ-RTC6WBL Page z Safety precautions ..........3 z Part names ............6 • Control panel / Top screen .......... 6 • Screen display ............. 7 • Operation guide ............7 z Basic operations ..........8 z Menu list ............
  • Page 2 Thank you for purchasing the Panasonic wired remote controller. z Read the Operating Instructions carefully for safe use. This manual describes the Operating Instructions of the wired remote controller. Read this manual as well as operating instructions supplied with indoor units and outdoor units.
  • Page 3: Safety Precautions

    Safety precautions WARNING CAUTION This symbol refers to a hazard or unsafe This symbol refers to a hazard or unsafe practice which can result in severe personal practice which can result in personal injury or injury or death. product or property damage. Matters to be observed Prohibited matters WARNING...
  • Page 4 Safety precautions [General precautions for ECONAVI] WARNING • Do not use the ECONAVI function in a room with disabled persons or infants only. Due to their limited motions, the ECONAVI sensor may judge no person is present, causing the indoor unit to stop the operation.
  • Page 5 Safety precautions [Precautions for using mobile device application] • When operating an air conditioner from a remote controller located outside the visibility of the air conditioner, make sure that the operation of the air conditioner will not negatively affect its surroundings or the occupants beforehand.
  • Page 6: Part Names

    Part names Control panel / Top screen The control panel colour of CZ-RTC6WBL is white. Appears when ECONAVI is being set to ON. Connected with a mobile device via Bluetooth functionality (P.29) (ECONAVI settings are possible only when fitted with ®...
  • Page 7: Screen Display

    Part names Screen display „ Internal cleaning in process „ Internal drying in process z To stop the z To stop the internal cleaning internal drying operation operation Press Press z To resume z To resume operation operation Press Press „...
  • Page 8: Basic Operations

    Basic operations Start operation. Press • Pressing after recovery from mains power failure will resume operation with the contents before mains power failure has occurred. • It is possible to set the screen in Step 2 as the top screen when starting operation. (P.23 “Display mode”) In that case, skip Step 2 below.
  • Page 9 Basic operations Set temperature Change the setting. (0.5 °C steps) Press → (Press to finish.) • Cool/Dry : 18.0 °C to 30.0 °C • Heat : 16.0 °C to 30.0 °C • Auto : 17.0 °C to 27.0 °C Operation mode (e.g. Cool, Heat, etc.) Press →...
  • Page 10 Basic operations Flap Change the setting. Press → (Press to finish.) : Swing • Pressing during swing can stop the flap at your preferred position. • The swing and airflow direction on the remote controller is not synchronised with the flap movement. •...
  • Page 11: Menu List

    Menu list Total number of items Turns the ECONAVI function ON/ 1 ECONAVI* P.12 Number for the selected item OFF. Turns the nanoe™ X function ON/ 2 nanoeX* P.15 OFF. 3 Filter sign Resets the time to filter cleaning. P.17 Prevents the room temperature from rising too high (or dropping 4 Outing function...
  • Page 12: Econavi Function

    ECONAVI function This function is available by attaching an optional ECONAVI sensor. The ECONAVI sensor detects human activity and conserves energy based on the activity level. Overview of the ECONAVI function • Cooling: Target temperature is the same as the set temperature. High activity •...
  • Page 13 ECONAVI function Note z ECONAVI can be set using the separately sold ECONAVI panel or by connecting the holder on the wall. z Even when target temperature is changed through the ECONAVI function, the set temperature shown in the remote controller does not change. z Even when Cooling/Heating is changed to Fan through the ECONAVI function, the operation mode shown in the remote controller will still be Cooling/Heating.
  • Page 14 ECONAVI function ECONAVI Display the menu screen. „ When stopped Press „ When operating Press repeatedly until the menu screen is displayed. • To return to the top screen, press Select [ECONAVI]. Press → Select [ON] or [OFF]. Press → →...
  • Page 15: Z Nanoe™ X Function

    nanoe™ X function Display during operation of nanoe™ X : Under operation of nanoe™ X nanoe™ X For a fresher and cleaner environment nanoe™ X generates negative ions using the air in the room to give a healthy air. It also reduces the smell in the room, and constrains propagations of mold and bacteria.
  • Page 16 nanoe™ X function nanoe™ X Display the menu screen. „ When stopped Press „ When operating Press repeatedly until the menu screen is displayed. • To return to the top screen, press Select [nanoeX]. Press → Select [ON] or [OFF]. Press →...
  • Page 17: Filter Sign

    Filter sign When the cleaning time comes, the icon shown on the right appears on the top screen. Filter sign reset Display the menu screen. „ When stopped Press „ When operating Press repeatedly until the menu screen is displayed. •...
  • Page 18: Outing Function

    Outing function This function prevents the room temperature from rising too high (or dropping too low) when no one is in the room due to outing, etc. General Performance of the Outing Function Outing function upper limit COOL / DRY 1 °C The air conditioner starts operation when the room temperature increases up to –1 °C of the...
  • Page 19 Outing function Outing function Display the menu screen. „ When stopped Press „ When operating Press repeatedly until the menu screen is displayed. • To return to the top screen, press Select [Outing function]. Press → Select [Enable/disable]. Press → Select [Enable].
  • Page 20: Clock/Clock Type/Controller Name

    Select the type to display. 24 h Press → → AM/PM (Press to finish.) Controller name The controller name can be set only with the “Panasonic H&C Control App”. Confirm the name. Confirm, then press (Press twice to finish.) (EN)
  • Page 21: Touch Sound/Contrast

    Touch sound/Contrast Steps 1 and 2 are common operations for each item. Display the menu screen. „ When stopped Press „ When operating Press repeatedly until the menu screen is displayed. • To return to the top screen, press Select the item to set. Press →...
  • Page 22: Backlight/Language

    Backlight/Language Steps 1 and 2 are common operations for each item. Display the menu screen. „ When stopped Press „ When operating Press repeatedly until the menu screen is displayed. • To return to the top screen, press Select the item to set. Press →...
  • Page 23: Contact Address/Display Mode

    Select the item to set. Press → Contact address The contact address can be set only with the “Panasonic H&C Control App”. Confirm the name and the contact number. Confirm, then press (Press twice to finish.) • If you need to contact for servicing, check the back cover of the operating instructions for indoor units or outdoor units.
  • Page 24: Setting Information List

    Setting information list This provides the meanings of setting information icons. Display the setting information screen. Press on the top screen. (Press and hold for 4 seconds or more.) Select the icon. Press → • Only icons currently being displayed on the screen are displayed here.
  • Page 25 Connected with a mobile device via Bluetooth ® functionality P.26 Bluetooth ® module is considered abnormal. P.60 (alternately) Clock not set (reset due to a power outage) P.59 (alternately) * Can only be set using the “Panasonic H&C Control App” (EN)
  • Page 26: Bluetooth ® Settings

    (P.4). Panasonic H&C Control App You can use the “Panasonic H&C Control App” on your mobile device to operate the air conditioning unit, make detailed settings for functions such as the energy saving function, etc. „ Functions that can be set with the “Panasonic H&C Control App” (some...
  • Page 27 Bluetooth ® settings Bluetooth functionality ® Display the menu screen. „ When stopped Press „ When operating Press repeatedly until the menu screen is displayed. • To return to the top screen, press Select [Bluetooth]. Press → Select [Enable/disable]. Press →...
  • Page 28 (enable) or (disable). Press → (Press to finish.) • This setting is the same as Step 4 on page 27. „ datanavi This unit supports datanavi. For details on the usage, supporting regions, etc., visit the following URL. https://datanavi.ac.smartcloud.panasonic.com/global/ (EN)
  • Page 29 Bluetooth® settings Bluetooth ® settings Connecting with the “Panasonic H&C Control App” Before connecting, set Bluetooth functionality to [Enable] on the remote controller. ® (Step 4 on page 27) When connecting, try getting the mobile device as close as possible to the remote controller.
  • Page 30 Bluetooth® settings Bluetooth ® settings Confirm the numbers on the mobile device match the 6 digits on the remote controller. • If the numbers do not match, check the remote controller you want to connect again. (Step 2) Start connecting. „...
  • Page 31 Bluetooth® settings Bluetooth ® settings „ To delete all mobile device information stored At first, set Bluetooth ® functionality to [Enable]. (P.27) 1. Display the menu screen. „ When stopped Press „ When operating Press repeatedly until the menu screen is displayed. •...
  • Page 32 (+ or –) (P.33) Power consumption Energy saving operation monitor (P.37) On/Off (P.40) Weekly timer (P.37) ON/OFF timer (P.39) • Functions are not displayed in the “Panasonic H&C Control App” screen if the air conditioner does not support them. (EN)
  • Page 33 Bluetooth® settings Bluetooth ® settings „ Operation mode Touch to select the operation mode. • Auto mode is automatically switched to Cool or Heat to achieve the set temperature. • Operation modes that cannot be set are not displayed. „ Set temperature Change set temperature (dial).
  • Page 34 Bluetooth® settings Bluetooth ® settings „ Fan speed Change fan speed. Auto fan toggle • Cannot be selected in Fan mode. • Depending on the model, selectable fan speed may differ. • Depending on the model, either of the displays appears.
  • Page 35 Bluetooth® settings Bluetooth ® settings „ Flap setting for each indoor unit When setting flaps for each indoor unit • Flaps of all air outlets of 1 indoor unit face the same direction. e.g. unit 1-1 e.g. unit 1-3 Select the indoor unit. •...
  • Page 36 Bluetooth® settings Bluetooth ® settings „ Flap setting for each air outlet (Lock individual flap) When setting the flap for each air outlet individually according to the room condition • Even if the flap setting of all indoor units or each indoor unit (P.35) is changed, the flap directions set here are not changed.
  • Page 37 Bluetooth® settings Bluetooth ® settings „ Power consumption monitor Select the period to display • You can view the power consumption (approx.). „ Weekly timer You can set a weekly operation schedule. • The operation ON/OFF schedule or temperature setting schedule can be set by setting the day and time (e.g.
  • Page 38 Bluetooth® settings Bluetooth ® settings Add new timer Select temperature. Operation ON/OFF toggle Set time Set conditions Complete the settings. Change/delete timer Edit timer Change timer Delete timer Copy timer Select the day of the week (setting destination) to apply the settings •...
  • Page 39 Bluetooth® settings Bluetooth ® settings „ ON/OFF timer This turns ON/OFF at the specified time. (e.g. Turning ON/OFF after 3 hours) 3 hours 3 hours Operation stop Operation start • Use OFF timer for example when: Reducing electric consumption while sleeping •...
  • Page 40 Bluetooth® settings Bluetooth ® settings „ Energy saving Refer to page 47 for information about the function. Energy saving operation on/off toggle : Energy saving operation Off : Energy saving operation On (EN)
  • Page 41 Bluetooth® settings Bluetooth ® settings „ Information You can view information about the connected units. Call a registered telephone number. This provides the meanings of setting information icons. Details are displayed when you press the icon. Air conditioner error messages Displays the time remaining in hours until the next filter cleaning is required.
  • Page 42 Bluetooth® settings Bluetooth ® settings „ Menu list The menus displayed when a remote controller is connected differ to the menus displayed when a remote controller is not connected. When a remote controller is connected When a remote controller is not connected Depending on the model, there are some menus that are not available.
  • Page 43 Bluetooth® settings Bluetooth ® settings „ Application settings (Menu Ú Application settings) Change the application’s settings. (Refer to page 44 to change the remote controller’s settings.) Change the display language of the application Change the type of clock display of the application (12h/24h) Change the type of Celsius/Fahrenheit display of the application (EN)
  • Page 44 Bluetooth® settings Bluetooth ® settings „ Controller settings (Menu Ú Controller settings) Change the remote controller’s settings. Change the name of the remote controller Change the display language of the remote controller Set the present date and time of the remote controller Change the type of clock display of the remote controller The clock is synchronised with a mobile device.
  • Page 45 Bluetooth® settings Bluetooth ® settings „ ECONAVI settings (Menu Ú H&C settings Ú ECONAVI settings) • Direct airflow: When the ECONAVI sensor detects a person, the unit swings wind up and down around where the person is Direct/Indirect airflow present. •...
  • Page 46 Bluetooth® settings Bluetooth ® settings *1: Types of the Absence operation mode Select the Absence operation mode from among the following 4 options on the remote controller. • Not set If human activity is detected, the operation status is restored according to the level of human activity.
  • Page 47 Bluetooth® settings Bluetooth ® settings „ Energy saving (Menu Ú H&C settings Ú Energy saving) z Temp. auto return Restoring the changed temperature to the originally set temperature automatically after a specified time elapses. (e.g. Only when a guest comes) z Temp.
  • Page 48 Bluetooth® settings Bluetooth ® settings „ nanoeX settings (Menu Ú H&C settings Ú nanoeX settings) nanoe™ X function on/off toggle Internal cleaning function on/off toggle „ Outing function (Menu Ú H&C settings Ú Outing function) Outing function on/off toggle Set the upper temperature and lower temperature for the outing function.
  • Page 49 Bluetooth® settings Bluetooth ® settings „ Ventilation (Menu Ú H&C settings Ú Ventilation) Ventilation operation on/off toggle „ Internal drying (Menu Ú H&C settings Ú Internal drying) Internal drying function on/off toggle (EN)
  • Page 50 (There is a warning displayed 1 minute before.) The password needs to be entered again if you are logged out. • The password also needs to be entered again if the “Panasonic H&C Control App” ends or if the Bluetooth ®...
  • Page 51 Bluetooth® settings Bluetooth ® settings „ Initial settings (Menu Ú Administrator settings Ú Initial settings) Set whether to use the temperature sensor of the remote controller or the indoor units. Change the Celsius/Fahrenheit display on the unit displayed on the remote controller Change the ventilation output setting.
  • Page 52 Bluetooth® settings Bluetooth ® settings „ Schedule peak cut (Menu Ú Administrator settings Ú Schedule peak cut) This reduces the operation capacity for the specified time period. Enable/disable toggle : Enable : Disable Add new setting Set the start time and end time and select the operation capacity. Complete the settings.
  • Page 53 Bluetooth® settings Bluetooth ® settings „ Rotation settings (Menu Ú Administrator settings Ú Rotation settings) z Rotation operation Equalizes the operation time by stopping the operation in order. This prevents the operation time from being uneven depending on the refrigerant system. System1 Operation Stand by...
  • Page 54 Bluetooth® settings Bluetooth ® settings z ROTATION (Menu Ú Administrator settings Ú Rotation settings Ú Rotation) Change the rotation cycle • 1 to 7 days (by the day) / 14 days / 21 days / 28 days / Not set (Rotation operation OFF) Set the switch-over time.
  • Page 55 Bluetooth® settings Bluetooth ® settings „ Operation lock (Menu Ú Administrator settings Ú Operation lock) Locks operations Complete the settings. „ Password change (Menu Ú Administrator settings Ú Password change) Change the remote controller’s password. Input new password. Retype the password to confirm. Complete the settings.
  • Page 56 Bluetooth® settings Bluetooth ® settings „ Group list (Menu Ú Group list) Edit the group name. Delete the group information. „ Template settings (Menu Ú Template settings) The settings for the weekly timer and the controller can be saved as templates even when there is no connection with the remote controller.
  • Page 57 Bluetooth® settings Bluetooth ® settings <How to load> For the weekly timer Show the list of saved template settings. Select the settings to be loaded. • The template settings are applied to the weekly timer. • The original data is overwritten. •...
  • Page 58: Troubleshooting

    Troubleshooting If operation does not start by pressing Check the following before asking for repair. When the [START/ z Being centrally controlled, operation is not STOP is prohibited.] possible. message is displayed z After recovery from blackout, press again. Blackout? →If operation does not start, turn off the circuit breaker and consult the dealer of purchase about the symptom and Model No.
  • Page 59 Troubleshooting The remote controller z Faulty sensor or incorrect installation. screen displays →Turn OFF the ECONAVI function with the remote controller (P.14) and contact the retailer “ ” “ ”. or point of purchase with the Model No. and (alternately) problem.
  • Page 60 Troubleshooting z Check if OS of the mobile device is compatible. The “Panasonic H&C Control App” is not The “Panasonic guaranteed to work with all versions of iOS H&C Control App” and Android™ OS. cannot be installed See page 61 for the versions of the OS in mobile device.
  • Page 61: Specifications

    Bluetooth ® SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners. • iOS is the name of the OS of Apple Inc. IOS is a trademark or registered trademark of Cisco in the US and other countries which has been licensed for use.
  • Page 62 The full text of the declaration of conformity is available at the following internet address: http://www.ptc.panasonic.eu/ Contact in the UK: Panasonic UK, a branch of Panasonic Marketing Europe GmbH, Maxis 2, Western Road, Bracknell, Berkshire, RG12 1RT (EN)
  • Page 63: Software License Information

    This product incorporates the following software: (1) The software developed independently by or for Panasonic Corporation, (2) The software owned by third party and licensed to Panasonic Corporation, (3) The open source software under the Apache 2.0 license. The software categorized as of (3) is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
  • Page 64 5. Submission of Contributions. Unless You explicitly state APPENDIX: How to apply the Apache License to your work. otherwise, any Contribution intentionally submitted for inclusion in the Work by You to the Licensor shall be under the terms and To apply the Apache License to your work, attach the following conditions of this License, without any additional terms or conditions.
  • Page 65 Setting Information Indoor unit model name Indoor unit serial number Outdoor unit model name Outdoor unit serial number System commissioning date Remote controller installation date Installer Contact Details Name Telephone number Maximum radio-frequency power transmitted in the frequency bands Type of wireless Frequency band Max EIRP (dBm) Bluetooth...
  • Page 66 CZ-RTC6WBL Model No. R-NZ Contact in the UK Panasonic UK, a branch of Panasonic Marketing Europe GmbH, Maxis 2, Western Road, Bracknell, Berkshire, RG12 1RT Authorized representative in EU Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany Panasonic Corporation http://www.panasonic.com...

This manual is also suitable for:

Cz-rtc6bl

Table of Contents