Panasonic CZ-RTC2 Programming Steps

Hide thumbs Also See for CZ-RTC2:

Download this manual See also: Instruction Manual, User Manual

Steps for programming

These are the locations of the keys used in this procedure.

Delete

Key

Wrench

Key

Steps for programming

Note: There can be up to 6 timed functions entered per day. Functions

must be entered in the order they occur 1-6.

CZ-RTC2

Program

Key

Set Key

Cancel

Key

CZ-RTC2

Remote Controller

Up or Down

Timer keys

Remote Controller

Up or Down

Day Keys

Page 1: Remote Controller
Steps for programming Remote Controller CZ-RTC2 These are the locations of the keys used in this procedure. Program Up or Down Timer keys Delete Up or Down Day Keys Wrench Set Key Cancel Steps for programming Remote Controller CZ-RTC2 Note: There can be up to 6 timed functions entered per day. Functions...
Page 2 1. Setting day of the week and current time of day: Push and hold the “SET” KEY and the hours will start blinking. While hours or minutes are blinking, you can also now set the day of the week. Press the “UP”...
Page 3  “P1” is for setting the hour the unit will be turned on. Press the “UP” or “DOWN” TIMER KEY and set the hour. Once desired hour is shown then press the “SET” KEY and will appear on the LCD display. ...
Page 4 3. Copying program from one day to the next: First press the “PROGRAM” KEY. Make sure the desired day of the week to be copied is highlighted by using the “UP” or “DOWN” DAY ARROWS. Now press the “PROGRAM” KEY one more time and the following will be displayed.