2. Select the mode with
You can also change the mode pressing ASPECT.
●
(Press repeatedly until you reach the desired mode.)
16:9:
Directly displays the image at 16:9 without distortion (anamorphic).
14:9:
Displays the image at the standard 14:9 without distortion.
Just:
Displays a 4:3 image full-screen. Stretching is only noticeable at the left
and right edges.
4:3:
Displays the image at the standard 4:3 without distortion.
Zoom:
Displays a 16:9 letterbox or 4:3 image without distortion.
4:3
Full:
Displays a 4:3 image enlarged horizontally to fit the screen.
For HD (High definition) signals
●
Sidecut
Just:
Displays a 16:9 letterbox (anamorphic) image full-screen. Stretching is
only noticeable at the left and right edges.
For HD (High definition) signals
●
Sidecut
Zoom:
Displays a 16:9 letterbox (anamorphic) image full-screen without distortion.
For HD (High definition) signals
●
= Note =
Display the image (TV, external input, etc.) full-screen to use this function
●
completely.
Aspect mode can be memorised separately for SD (Standard definition)
●
and HD (High definition) signals.
Aspect cannot be changed in teletext service.
●
Advanced Settings
You can adjust and set up the detailed picture settings for each input when
●
Viewing Mode
is set to
Watching
1. Select the input mode with
/
and press
True Cinema
or Custom.
For best picture
Viewing Mode
AV
or
TV
- 27 -
OK
to set