■
Edit Digital TV / Analogue TV Channels
To swap / move the channel position (if available)
●
1) Press
(green) to edit
2) Set the new position with
(green) to store
To retune each channel
●
(red)
Watching
To rename the channel name (Analogue TV)
●
1) Press
(blue) to edit
2) Enter characters (maximum 5 characters) with
numeric buttons, and press
3) Press
RETURN
= Note =
If a VCR is connected only with the RF cable in Analogue TV, edit VCR.
●
Auto Tuning
Automatically retunes the channels received in the area.
All the previous tuning settings are erased.
●
Search begins in the order from the lower channels to the higher channels.
●
If tuning has not been done completely, set
●
Watching
1. Select
Auto Tuning
2. The confirmation screen is displayed and press
(Settings are made automatically)
When the operation is completed, the channel at the lowest position will
●
be displayed.
This setting is applicable only for the selected TV mode.
●
■
Auto Tuning using the buttons on the TV
1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds to
/
or numeric buttons, and press
(Manual
Tuning)
Tuning and editing channels
OK
to set
to store
Tuning and editing channels
with
/
and press
- 37 -
Manual Tuning
/
/
/
Manual
Tuning.
Manual Tuning
OK
to access
OK
to start
Auto Tuning
or