When using an HDMI cable, it is recommended to use fully wired one.
●
Check the terminal type and cable plugs are correct when connecting.
●
Selecting channel
1. Select Digital TV or Analogue TV with
You can also select the mode pressing INPUT/OK/HOLD for MENU
●
button repeatedly on the control panel of the TV.
The selected mode is displayed on the top left of the screen.
●
2. Select a channel with Channel Up / Down or numeric buttons
Press the numeric buttons to select a channel position with 2 or more-
●
digit (e.g. 399, press
■
To select a channel from the channel list
1. Display the channel list with
2. Select a channel from the list with
■
To select a channel using information banner
1. Display information banner with
2. Select a channel with
displayed
Watching
■
To select a channel using TV Guide
Using the Freeview Guide enables you to select a programme easily.
For Digital TV
●
Watching
Information banner
Display information banner with INFO.
Also appears when changing a channel.
●
).
OK
/
INFO
/
and press
Basic
Information banner
TV Guide
Freeview Guide
- 15 -
TV
and press
OK
to watch
if it is not displayed
OK
to watch while the banner is