Table of Contents
Advertisement
Power off Link
Set
Power off Link
to
Settings
When the TV is set to Standby mode, the connected equipment is also
automatically set to Standby.
This function will work even if the TV enters Standby mode automatically
●
by auto power standby function.
Standby Power Save
Set
Standby Power Save
Settings
The power consumption of the connected equipment in Standby mode is
controlled higher or lower in synchronisation with the TV on / off state to
reduce the consumption.
When the TV is set to Standby mode, the connected equipment is
automatically set to Standby and the power consumption of the connected
equipment is automatically minimised.
When the TV is turned on, the connected equipment is still in Standby mode,
but the power consumption is increased to start the connected equipment
fast.
This function is effective if the connected equipment can change the power
●
consumption in Standby mode and is set to higher consumption.
This function works when
●
Intelligent Auto Standby
Set
Intelligent Auto Standby
Settings
When the TV is on, non-used connected equipment goes into Standby mode
automatically to reduce the power consumption. For example, when the input
mode is switched from HDMI or when
(except for watching a disc).
This function may not work properly depending on the connected
●
equipment. In this case, set to Off.
VIERA Link Control
You can control some functions of the connected equipment with this TV's
remote control by pointing at the TV's signal receiver.
1. Display APPS list with
2. Select
VIERA Link
3. Select
VIERA Link Control
On
in the Setup Menu to use this function.
Setup
VIERA Link Settings
to
On
in the Setup Menu to use this function.
Setup
VIERA Link Settings
Power off Link
to
On
in the Setup Menu to use this function.
Setup
VIERA Link Settings
Speaker Selection
APPS
with
/
/
/
with
/
- 108 -
is set to On.
is changed to
and press
OK
to access
and press
OK
to access
TV
- Quick Links:
- Basic Connection
Hide quick links:
Advertisement
Table of Contents
