Speaker Selection; Note - Panasonic TH-L32E6Z Quick Manual

Speaker Selection

You can control the theatre speaker with this TV's remote control by pointing
at the TV's signal receiver.
1. Display APPS list with
2. Select VIERA Link
3. Select Speaker Selection
4. Select Home Cinema
Home Cinema:
The sound is delivered from theatre speakers. Player theatre, Blu-
ray Disc theatre or Amplifier will be automatically turned on if it is in
Standby mode.
The sound of TV speakers is mute. When the equipment is turned
●
off, TV speakers will be activated.
You can use the Volume Up / Down button and MUTE.
●
TV:
TV speakers are active.
■
Multi-channel sound
If you want to enjoy the multi-channel sound (e.g. Dolby Digital 5.1ch) via
an Amplifier, connect it with an HDMI cable and Optical digital audio cable,
and then select Home
function, you only need to connect it with an HDMI cable to the TV's HDMI2
terminal.
To enjoy the sound from the DIGA Recorder in multi-channel sound, connect
an HDMI cable from the DIGA Recorder to the Amplifier.

= Note =

If you cannot operate the equipment, check the settings and the
●
equipment.
Functions
Note
These functions may not work properly depending on the connected
●
equipment.
Image or sound may not be delivered for the first few seconds when the
●
input mode is switched.
APPS
with / / /
with / and press
/ TV with /
Cinema. If your Amplifier has the "HDAVI Control 5"
VIERA Link "HDAVI Control™"
- 110 -
and press OK to access
OK to access
and press OK to set
Summary of VIERA Link