Section 8: Appliance Setup; Remove Shipping Materials; Top To Rear Vent Conversion - Quadra-Fire TOPAZ Direct Vent Room Heater 839-1290 Owner's Manual

8
Appliance Setup
A. Remove Shipping Materials
Remove shipping materials from inside or underneath the
firebox.
B. Top to Rear Vent Conversion
KIT CONTENTS: Rear vent grille.
TOOLS REQUIRED: Power drill; #2 Phillips bit;high-temp
silicone sealant (optional.)
Remove top trivet, if installed. Remove vent pipe
Figure 8.1
adapter and gasket. If gasket breaks, apply high-tempera-
ture silicone to the bottom of the adapter before installing as
indicated in Figure 8.6.
CAUTION
Sharp Edges
• Wear protective gloves
and safety glasses during
installation.
Remove inner collar adapter
Figure 8.2
September 1, 2008
Figure 8.3
access plate and gasket. Save the screws.
Figure 8.4
attach with the eight screws previously removed.
Figure 8.5
Quadra-Fire · Topaz · 7009-113G
Remove rear valve cover shield. Remove rear
Place cover plate and gasket over top vent and
Insert inner collar adapter to rear vent flue.
Page 29