Using Test Local Mode; Using Resume Normal Mode - Nortel 1110 User Manual

Additional phone features
Local Mode
If the WAN connection fails, the IP Phone loses communication with the
Main Office Telephone Preference Service (TPS). It then registers with
the MG 1000B and receives telephone services from the MG 1000B.
When in Local Mode, the telephone displays the message LOCAL
MODE.
This section provides more information on the following topics:
•

Using Test Local Mode

•

Using Resume Normal Mode

• Troubleshooting MG 1000B
Using Test Local Mode
Use Test Local Mode to check Local Mode functionality (make and
receive telephone calls). Test Local Mode is useful when provisioning has
changed for an IP Phone on an MG 1000B Controller.
(Services)
Using Resume Normal Mode
Use the Resume Normal Mode command to return to Normal Mode after
testing survival functionality.
88
1. Press the Services
2. Press the Up/Down
scroll and highlight
3. Press the Enter
resets and registers back to the Main
Office).
key.
navigation keys to
Test Local Mode.
key (the telephone