Zoom 3G+ Modem/Router User Manual page 60

of the SSID
invisible to wireless clients on the network, click the Disable radio button.
Channel
Refers to the wireless network channel assigned to your LAN. By default,
the Modem/Router uses channel 10.
Wireless Mode
Accept the default, B/G/N mixed if the client devices on your network use
various wireless standards. Otherwise, select the wireless standard used by
all wireless devices on your network. Having a single standard will speed up
the wireless throughput.
Authentication
Select an Authentication method for all devices on your wireless network. If
you are using gaming devices that require WEP, then you must configure all
devices with this method. By default your Modem/Router is set for
WPA-PSK/WPA2-PSK. A random Security Key is programmed in at the
factory. The key can be found on the bottom label on your unit.
For WPA-PSK/WPA2-PSK Authentication:
You can select WPA-PSK/WPA2 PSK if your devices support both
authentication methods. Optionally, select WPA-PSK or WPA2-PSK if all
devices on your network support only one of these authentication methods.
For WEP Authentication:
If one of your devices uses WEP you should select WEP-Auto. If you know
what type of WEP your device uses select either WEP-Open to use Open
System authentication. Select WEP-Shared to use Shared Key
authentication.
Encryption
Select an Encryption method that corresponds to the Authentication
method that you chose.
If you chose a WPA-PSK/WPA2-PSK Authentication method:
Accept TKIP/AES encryption (the WPA-PSK/WPA2-PSK default), which
supports dynamic encryption keys using TKIP or AES algorithms, or choose
one of the other options.
Select AES if you chose WPA2-PSK for the authentication method.
Select TKIP if you chose WPA-PSK for the authentication method.
In the Security Key field, enter a minimum 8-character key.
If you chose a WEP Authentication method:
Select WEP.
60
and makes the wireless access point (your Modem/Router)
3G+ Modem/Router with Wireless-N and Phone Port User Manual