Zoom 3G+ Modem/Router User Manual page 62

1
In the Authentication drop down bar select WPA – PSK/WPA2 – PSK. If you
know all your devices support WPA2-PSK you can select it instead. This is
the default setting.
2
In the Security Key field enter a value for the key. The maximum value is 42
characters. The minimum value is 8 characters. By default a Security Key is
programmed into your unit at the factory. This Security Key is found on the
bottom label of your unit. Most users should use this key.
3
If you change the Security Key write it down and put it where you can find it –
on the bottom of the case, for instance.
4
Click Save. If you are connected wirelessly to the Modem/Router you will lose
the connection as soon as you click Save. When you re-establish your
wireless connection you will be prompted for the security key that you just
entered. You must enter this key to be able to connect to the Modem/Router.
5
Now you need to set up each of your wireless devices with the Security Key
that you entered. See
instructions on connecting devices to the Modem/Router.
62
Establishing your Wireless Network
3G+ Modem/Router with Wireless-N and Phone Port User Manual
on page 28 for