Zoom 3G+ Modem/Router User Manual page 51

WAN Link Down
Click Enable if you want the Modem/Router to send a notification message
to users in the access control list when the Internet connection goes down.
Secondary WAN is Up
Click Enable if you want the Modem/Router to send a notification message
to users in the access control list that the secondary Internet connection has
been established.
Secondary WAN is Down
Click Enable if you want the Modem/Router to send a notification message
to users in the access control list that the secondary Internet connection
goes down.
Access Control List
These commands allow you to specify what phone numbers can send commands to your
Modem/Router and what phone numbers the Modem/Router will send notifications to. If
you have Remote Management enabled and Access Control disabled, then any phone
number can send commands to the Modem/Router if it has the correct Security Key.
Access Control
Click Enable if you want to control what phone numbers can send
commands to the Modem/Router. If you want to send notifications out when
your connection goes down, for example, then you must enable Access
Control and have at least one phone number set up for notifications.
Any Phone Number
Click Enable if you want the Modem/Router to allow any phone number to
send commands to the Modem/Router. This command is used if you decide
to enable notifications but still want any phone number that enters the
correct security key to be able to control the Modem/Router.
Phone 1-5
Enter the phone numbers you want to either control the Modem/Router
and/or receive notifications. If you want the phone number to receive
notifications of events such as the Modem/Router disconnected, check the
Notifications box. If you want only the phone numbers you list to be able
to control the Modem/Router, check the Management box. If you only
want certain phone numbers to be able to control the Modem/Router, do not
enable Any Phone Number.
Example
This example will show you how to set up and send a command to the
Modem/Router.
Chapter 6: Working with Text Messages 51