Draytek Vigor610 User Manual page 28

Below is the page that you choose Enable as IP setting. Click Next to enter detailed
information.
In this page, you can activate DHCP server to acquire IP or set the IP settings manually.
DHCP Status
IP Address
Subnet Mask
Default Gateway
DNS Server
28
Choose Enable if you want TCP/IP setting assigned by DHCP
server. If you choose Enable, the IP Address, Subnet Mask, Default
Gateway and DNS Server will be disabled. And, if you want to set
the IP address manually, you should choose Disable.
Type the IP address for this wireless card.
The default setting, 255.255.255.0 will be displayed automatically.
Type the gateway of this wireless card.
Type the IP address for the DNS Server if necessary.
Vigor610 Series User's Guide