Draytek Vigor610 User Manual page 26

Shared Key
WPA-PSK
When you finish the settings of this page, click Next to open next page. For Open System and
Shared Key modes, you will see the following page.
Input Method
Key
26
For this mode, you have to choose the value for encryption. There
are two selections for you to choose, 64 bits and 128 bits.
For this mode, you have to choose input method. There are two
selections for you to choose, TKIP and AES.
Choose the input mode for the wireless card. The method you
choose here must be the same as the method set in the connected AP.
The method you choose here determines the number
The number you typed here should be the same as the number set in
the connected AP. According to the input method you selected, the
characters that you have to set will differ.
For Alphanumeric: Type 5 alphanumeric characters in this field.
For Hexadecimal (0-9, A-F): Type 10 hexadecimal numbers in this
field.
For Passphrase: Type 1 to 32 alphanumeric characters in this field.
Vigor610 Series User's Guide